This indoor security camera also contains a strobing white LED that flashes every few seconds to let you know the camera is operational. It also makes it obvous that your location has surveillance cameras - you can't miss this tiny strobe at night. It flashes about once every 2-3 seconds and is very noticeable in the dead black of a dark night. Not only will it tell would-be criminals you've got cameras, it will draw attention to your business after-hours and increase awareness. NOTE: If you do not want this LED to strobe, you can disable it easily and doing so will not affect your warranty.

SPECIFICATIONS

• Indoor design
• 1/3" Color Sony HQ1 video sensor
• Extra high resolution: 540 lines
• Minimum illumination: 0.5 Lux (F1.2), 0.0 Lux with IR on
• Internal sync
• 4-9mm varifocal, auto-iris lens
• 30 IR LEDs with Smart IR technology that automatically turns groups (segments) of LEDs on/off as required to enhance image clarity and avoid IR washout at close range.
• Auto electronic shutter: 1/60th to 1/100,000 second
• Video output: 1 Vp-p / 75 ohms
• Signal to noise ration >48db (AGC off)
• Gamma correction 0.45 typical
• Auto-gain control
• Auto-white balance
• Auto-back light compensation
• 3-axis adjustable bracket mount
• Power: 12VDC or 24VAC
• Power input is non-polarized and accepts either 24VAC or 12VDC on the same line. You can NOT hook up DC power backwards, which means you will never burn up this camera by accidentally applying DC power in reverse. To make connection to your power supply (or ours) flexible it is provided with pre-stripped and tinned wires for power input. Solder these leads directly to your power line or use wire nuts to make a tight "twist" connection - either way is fine.
• Operating temperature: -10°C - 45°C (14°F - 113°F)
• One year warranty.