Surveillance kit, outdoor security cameras, surveillance dvr, hidden spy cameras



This indoor/outdoor dome camera has an extra high resolution Sony HQ1 video sensor, a built-in infrared LED array, and a reinforced, coated acrylic dome with high impact resistance (tested with 10lb sledgehammer) coupled with a high grade hard aluminum alloy base. This design gives the camera a high tamper/vandal resistance factor making it perfect for outdoor use in many situations, including urban surveillance scenarios where a lesser camera wouldn't last. Other features include optional cable routing feature and anti-tamper screws. Enhanced video quality under low and no visible light is possible due to the Sony infrared sensitive video sensor, an aspherical lens, an automatic IR cut filter, and an array of infrared LEDs under Smart Technology control. The camera automatically senses brightness and available light and turns on groups of IR LEDs in 4 stages - 6, 12, 18, and 30 units on/off as required. Advanced design features make this camera easy to setup, install and maintain. You can select 12VDC or 24VAC power input (the camera accepts either with no special settings). When you place it or move it you can easily check the aim and focus with a portable monitor - a test composite output (RCA jack) is built into the camera itself so there's no need for a second person or a trip to a remote location to verify camera aim. The internal bracket design allows movement in 3 axis, so you can point the camera virtually anywhere once you've attached it to a wall or ceiling. This camera is a great selection for store front, behind counters, and overlooking display cases. The internal test monitor output makes changes easy so it's a great time saver if you're putting a camera up in an area that might change due to placement of furniture, artwork, vendor booths, kiosks, and similar objects that force you to alter the aim of the camera. Specifications 1/3"�color Sony HQ1 CCD high resolution video sensor Extra high resolution: 540 lines 3.6mm aspherical lens Weatherproof: sealed against wind, snow and rain. NTSC (PAL available) Minimum illumination 0.5 lux (F1.2), 0.0 lux with IR on 30 units IR LEDs operating at 850nm with threshold sensing Smart IR technology for automatic control, turning on/off groups as required so the image is never washed out by too much IR. Automatic IR cut filter Hardened acrylic dome, coated and designed to eliminate internal IR glare that would effect video quality Auto electronic shutter Auto-gain control (AGC) Auto-white balance Back light compensation Signal-to-noise ratio: ~48db Scanning system 2:1 interlace Video output: 1Vp-p composite video / 75 ohms Dual power input for flexibility. (Select either 12VDC or 24VAC) Current draw: approximately 300mA, 530mA with IR on (nominal) Operating temperature: 14� to 113� F (-10� to 45� C) Weight: 630.5g (1.39lbs) Dimensions: 6.18" diameter x 3.78" tall (157mm x 96mm) Attached video/power cord combination. Hardware installation pack and mounting gasket included. Anti-tamper screws hold assembly together. Designed to route cables through mounnting surface or using alternate outlet (threaded, sealed port for surface cable routing/conduit attachment if desired) One year warranty.