Surveillance kit, outdoor security cameras, surveillance dvr, hidden spy cameras



This indoor/outdoor dome camera has Sony HQ1 video sensor, a built-in infrared LED array, mechanical IR filter, and a reinforced, coated acrylic dome with high impact resistance (tested with 10lb sledgehammer) coupled with a high grade hard aluminum alloy base. This design gives the camera a high tamper/vandal resistance factor making it perfect for outdoor use in many situations, including urban surveillance scenarios where a lesser camera wouldn't last. Other features include optional cable routing feature and anti-tamper screws. Enhanced video quality under low and no visible light is possible due to the Sony infrared sensitive video sensor and an array of infrared LEDs under Smart Technology control. The camera automatically senses brightness and available light and turns on groups of IR LEDs in 4 stages - 6, 12, 18, and 30 units on/off as required. Video quality is further enhanced in this premium camera by the addition of a mechanic IR filter and a 3.8-9.5mm varifocal auto-iris lens. Advanced design features make this camera easy to setup, install and maintain. You can select 12VDC or 24VAC power input (the camera accepts either with no special settings). When you place it or move it you can easily check the aim and focus with a portable monitor - a test composite output (RCA jack) is built into the camera itself so there's no need for a second person or a trip to a remote location to verify camera aim. The internal bracket design allows movement in 3 axis, so you can point the camera virtually anywhere once you've attached it to a wall or ceiling. This camera is a great selection for store front, behind counters, and overlooking display cases. The internal test monitor output makes changes easy so it's a great time saver if you're putting a camera up in an area that might change due to placement of furniture, artwork, vendor booths, kiosks, and similar objects that force you to alter the aim of the camera. SPECIFICATIONS 1/3" color Sony HQ1 video sensor NTSC (PAL output also available) Resolution: 540 lines Minimum illumination: 0.5 Lux (F1.2), 0.0 Lux with IR on Automatic mechanical IR filter for enhanced video in all light levels 30 units IR LEDs operating at 850nm with threshold sensing Smart IR technology for automatic control, turning on/off groups as required so the image is never washed out by too much IR. Signal-to-noise ratio: >48db Scanning system 2:1 interlace Video output: 1Vp-p composite video / 75 ohms 3.5-9.5mm varifocal lens Auto-iris Auto-gain control (AGC) Auto white balance Auto back light compensation Power: 12VDC or 24VAC flexible power input Current Draw: 320mA, 600mA with IR on (nominal) +/-10% (nominal) Attached video & power cable Dimensions: 157mm (diameter at base) x 96mm (H) / 6.18" x 3.78" Weight: ~630.5g (1.39lbs) Operating temperature: -10 to 45-degrees C (14 to 113-degrees F) 3-axis easily adjustable internal bracket Internal composite test monitor output Installation hardware kit included One year warranty.